เครื่องมือออโตเมทีฟ

KENNEDY : เครื่องมือออโต้เมทีฟ

Multi-function Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.

KENNEDY : เครื่องมือออโต้เมทีฟ

SWP9 Steering Wheel Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.

KENNEDY : เครื่องมือออโต้เมทีฟ

For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness: 42 - 45 HRC.

KENNEDY : เครื่องมือออโต้เมทีฟ

2 & 3 Jaw Reversible/Double Ended/Adjustable Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions.

KENNEDY : เครื่องมือออโต้เมทีฟ

Extra Long Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft. Spread: 10 - 50mm. Reach: 300mm.

KENNEDY : เครื่องมือออโต้เมทีฟ

Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what ‘spread’ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

KENNEDY : เครื่องมือออโต้เมทีฟ

Industrial Reversible/Double Ended Adjustable Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double ended, adjustable, reversible legs and can be used for internal and external applications.

KENNEDY : เครื่องมือออโต้เมทีฟ

10 ton capacity hydraulic ram with tommy bar. Suitable for agricultural machines, garage and industrial use.

KENNEDY : เครื่องมือออโต้เมทีฟ

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. Can be used as a two or three legged puller with the same head.

KENNEDY : เครื่องมือออโต้เมทีฟ

30 - 75mm For removing bearings, gears, sprockets and bushes. Metal storage case.

KENNEDY : เครื่องมือออโต้เมทีฟ

HS7 105 - 150mm HS11 75 - 105mm For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.

KENNEDY : เครื่องมือออโต้เมทีฟ

3 Jaw Internal & External Multi-function Slide Hammer Puller Set Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

KENNEDY : เครื่องมือออโต้เมทีฟ

HS7 105 - 150mm HS11 75 - 105mm For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.