เหล็กดูดมู่เล่ย์ 2 ขา - เหล็กดูดมู่เล่ย์ 3 ขา

ACT : เครื่องมือออโตเมทีฟ ACT-50HS

เหล็กดูดสามขาไฮโดรลิค แบบแยกปั้ม มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-30HS

เหล็กดูดสามขาไฮโดรลิค แบบแยกปั้ม มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-20HS

เหล็กดูดสามขาไฮโดรลิค แบบแยกปั้ม มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-10HS

เหล็กดูดสามขาไฮโดรลิค แบบแยกปั้ม มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-5HS

เหล็กดูดสามขาไฮโดรลิค แบบแยกปั้ม มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-50H

เหล็กดูดสามขาไฮโดรลิค มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-30H

เหล็กดูดสามขาไฮโดรลิค มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-20H

เหล็กดูดสามขาไฮโดรลิค มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-10H

เหล็กดูดสามขาไฮโดรลิค มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

ACT : เครื่องมือออโตเมทีฟ ACT-5H

เหล็กดูดสามขาไฮโดรลิค มีขนาดให้เลือก OVERALL PULLER HYDRAULIC GEAR PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

New

OKURA เครื่องมือออโตเมทีฟ E-OK-12LJP

E-OK-12LJP เหล็กดูดทดเกียร์ 10 นิ้ว OKURA LABOR SAVING JAW PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

New

OKURA เครื่องมือออโตเมทีฟ E-OK-10LJP

E-OK-10LJP เหล็กดูดทดเกียร์ 8 นิ้ว OKURA LABOR SAVING JAW PULLER

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

New

OKURA เครื่องมือออโตเมทีฟ E-OK-QA23P

E-OK-QA23P ชุดเหล็กดูด 2 ขา และ 3 ขา แบบเลื่อนเร็ว สลับดูดใน-นอกได้ OKURA QUICK SLIDE ADJUSTABLE TWO & THREE JAW PULLER SET

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-1300K

Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-4400K

Hardened steel screws and cast steel claws.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-1400K

Hardened steel screws and cast steel claws.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-2420K

Hardened steel screws and cast steel claws.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-2410K

Hardened steel screws and cast steel claws.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-7200K, KEN-567-8230K

10 ton capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. With tommy bar.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3480K

Multi-function Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3400K, KEN-503-3420K, KEN-503-3440K

Mechanical Pullers Set SWP9 Steering Wheel Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3230K ,KEN-503-3019K, KEN-503-3260K, KEN-503-3280K

2 & 3 Jaw Reversible/Double Ended/Adjustable Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3320K

Extra Long Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft. Spread: 10 - 50mm. Reach: 300mm.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3130K

Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what ‘spread’ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3010K

Industrial Reversible/Double Ended Adjustable Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double ended, adjustable, reversible legs and can be used for internal and external applications.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3500K

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. Can be used as a two or three legged puller with the same head.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

KENNEDY : เครื่องมือออโต้เมทีฟ KEN-503-3340K

3 Jaw Internal & External Multi-function Slide Hammer Puller Set Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OKURA : เครื่องมือออโตเมทีฟ

เหล็กดูด 3 ขาอเนกประสงค์ MULTI-FUNCTIONAL 3-JAW มีหลายขนาดให้เลือกตั้งแต่ 75 - 450 มม. (3 - 18 นิ้ว)

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OKURA : เครื่องมือออโตเมทีฟ

เหล็กดูดมู่เล่ 3 ขา รุ่นขาดูดลึก OKURA 3-JAW GEAR PULLER มีขนาดให้เลือกตั้งแต่ 4 - 16 นิ้ว จับชิ้นงานขนาด 20 - 500

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OKURA : เครื่องมือออโตเมทีฟ

เหล็กดูด 3 ขา OKURA 3-JAW GEAR PULLER มีขนาดให้เลือกตั้งแต่ 3 - 24 นิ้ว ดูดได้ 95 - 440 มม.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OKURA : เครื่องมือออโตเมทีฟ

เหล็กดูด 2 ขา OKURA 2-JAW GEAR PULLER มีขนาดให้เลือกตั้งแต่ 3 - 16 นิ้ว ดูดได้ 95 - 440 มม.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR : เครื่องมือออโตเมทีฟ CK Series

เหล็กดูดสามขา สำหรับงานหนัก Hydraulic Puller Heavy-Duty

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR : เครื่องมือออโตเมทีฟ CK-25INL EXTRA*

เหล็กดูดสามขา แยกปั๊ม สำหรับงานหนัก Saparable Hydraulic Puller Heavy-Duty

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR เครื่องมือออโตเมทีฟ CK Series

เหล็กดูดสามขา แยกปั๊ม สำหรับงานหนัก มีใหเลือก 3 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR : เครื่องมือออโตเมทีฟ HHL-S Series

เหล็กดูดสามขา ถอดลูกปืน ใช้งานง่าย ประหยัดเวลาการทำงานเบาแรง และปลอดภัยกว่า มีให้เลือก 3 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR : เครื่องมือออโตเมทีฟ HHL Series

เหล็กดูดสามขาแบบมีปั้มไฮดรอลิคในตัว ใช้งานง่าย ประหยัดเวลาการทำงานเบาแรง และปลอดภัยกว่า มีให้เลือก 5 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR : เครื่องมือออโตเมทีฟ HHL-F Series

เหล็กดูดสามขา แยกปั๊ม มีให้เลือก 5 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR เครื่องมือออโตเมทีฟ HHL3 Series

เครื่องถอดลูกปืน เฟือง พร้อมจานดูด มีให้เลือก 4 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

OMASTAR เครื่องมือออโตเมทีฟ HHL3 F Series

เหล็กดูดลูกปืนสามขา พร้อมจาน ปั๊ม มีให้เลือก 4 รุ่น

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

BUCO

เหล็กดูดมู่เล่ 2 ขา รุ่น 20 (Twin grip) 2-Arm Mechanical Pullersมีขนาดให้เลือก 20 - 150 และ 40 - 200 มม.

ขายแล้ว 0 ชิ้น

฿0 ฿0
 

 

เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้