Hydraulic Puller Set KEN-503-3500K

รหัสสินค้า : KENNEDY : เครื่องมือออโต้เมทีฟ

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. Can be used as a two or three legged puller with the same head.



  • 1x combination head.
  • 1x hydraulic ram.
  • 3x three position puller legs.
  • 6x leg connectors.
  • 6x screw nuts, bolts and washers.
  • 1x 32mm extension rod.
  • 1x ram nut.
  • 1x blow moulded storage case.
ORDER CODE : KEN-503-3500K
  • Product Number : HP19
  • Weight each : 4.90kg

** สินค้าจริงอาจแตกต่างจากภาพในหน้าจอ เนื่องจากการจัดแสงในการถ่ายภาพ การแสดงผลของหน้าจอ และการผลิตในแต่ละล็อต ทางบริษัทฯขอสงวนสิทธิ์ไม่รับเปลี่ยน/คืนสินค้า **


KENNEDY : เครื่องมือออโต้เมทีฟ

Extra Long Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft. Spread: 10 - 50mm. Reach: 300mm.

KENNEDY : เครื่องมือออโต้เมทีฟ

Industrial Reversible/Double Ended Adjustable Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double ended, adjustable, reversible legs and can be used for internal and external applications.

KENNEDY : เครื่องมือออโต้เมทีฟ

3 Jaw Internal & External Multi-function Slide Hammer Puller Set Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

KENNEDY : เครื่องมือออโต้เมทีฟ

Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what ‘spread’ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.