Square Shank Boring Tools Held at 80° in Bar

รหัสสินค้า : KENNEDY : CUTTING TOOLS

Manufactured in three standard grades. (All sizes are nominal.) Manufactured to ISO DIN BHMA Standards.P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.

Share

รายละเอียดสินค้า

P30:: Carbide tipped tools are suitable for heavy duty turing and boring on all classes and machining at low speeds and heavy feeds.
 
ORDER CODE : KEN-100-6580K
  • Tool No.:300 Cut:N Shank: H 1/4" W 1/4"
ORDER CODE : KEN-100-6750K
  • Tool No.:308 Cut:N Shank: H 3/8" W 3/8"
ORDER CODE : KEN-100-6920K
  • Tool No.:316 Cut:N Shank: H 1/2" W 1/2"
** สินค้าจริงอาจแตกต่างจากภาพในหน้าจอ เนื่องจากการจัดแสงในการถ่ายภาพ การแสดงผลของหน้าจอ และการผลิตในแต่ละล็อต ทางบริษัทฯขอสงวนสิทธิ์ไม่รับเปลี่ยน/คืนสินค้า **

สินค้าเกี่ยวข้อง

KENNEDY : CUTTING TOOLS

P40:: Roughing to heavy roughing of steel snd steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable condetions, particularly where intermittent cutting is involved.This grade is also suitable for planing operations and for machining manganese steel. P30:: Carbide tipped tools are suitable for heavy duty turing and boring on all classes and machining at low speeds and heavy feeds. K20:: General purpose tools for most applications. Ideal for machining cast iron,non-ferrous metals,backelite etc.turning at wear resistance with toughness when rough turing at moderate cutting speeds.Suitable for high feed rates

KENNEDY : CUTTING TOOLS

P30:: Carbide tipped tools are suitable for heavy duty turing and boring on all classes and machining at low speeds and heavy feeds. K20:: General purpose tools for most applications. Ideal for machining cast iron,non-ferrous metals,backelite etc.turning at wear resistance with toughness when rough turing at moderate cutting speeds.Suitable for high feed rates

KENNEDY : CUTTING TOOLS

P30:: Carbide tipped tools are suitable for heavy duty turing and boring on all classes and machining at low speeds and heavy feeds.

KENNEDY : CUTTING TOOLS

P30:: Carbide tipped tools are suitable for heavy duty turing and boring on all classes and machining at low speeds and heavy feeds. K20:: General purpose tools for most applications. Ideal for machining cast iron,non-ferrous metals,backelite etc.turning at wear resistance with toughness when rough turing at moderate cutting speeds.Suitable for high feed rates

สินค้าที่เคยเข้าชม
ยังไม่เคยเข้าชมสินค้า