G.518

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1440K, KEN-518-1450K, KEN-518-1445K

Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1410K, KEN-518-1420K, KEN-518-1430K

For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.

KENNEDY : เครื่องมือช่าง HANDTOOLS Taper Punches

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2400K

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2200K

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

KENNEDY : เครื่องมือช่าง HANDTOOLS Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

KENNEDY : เครื่องมือช่าง Straight Shank Hollow Punches

Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2323K, KEN-518-2324K, KEN-518-2325K

Long Parallel Punch Set Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2332K, KEN-518-2333K,KEN-518-2334K

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Made from chrome vanadium steel with high strength octagonal shanks and featuring cushioned grip handles with shock absorbing air pockets. Overall length: 150mm (6").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2430K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2428K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2426K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2425K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2424K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2423K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2422K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2418K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2416K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2415K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2414K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2413K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2412K

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2270K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2250K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2230K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2220K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2120K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2110K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2090K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2070K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2060K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2050K

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS 3066. Overall length: 100mm (4").

KENNEDY : เครื่องมือวัดละเอียด KEN-519-3030K, KEN-519-0340K, KEN-519-3050K, KEN-519-3100K, KEN-519-3200K, KEN-519-3500K

Useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 150mm with a line, thickness in hundredths of a mm.

KENNEDY : เครื่องมือวัดละเอียด KEN-518-0820K, KEN-518-0850K, KEN-518-0940K, KEN-518-0890K, KEN-518-0920K

Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.

KENNEDY : เครื่องมือวัดละเอียด KEN-519-0020K, KEN-519-0030K, KEN-519-0040K, KEN-519-0050K, KEN-519-0060K, KEN-519-0080K, KEN-519-0100K, KEN-519-0120K, KEN-519-0500K

12" long, 1/2" wide feeler stock strips with rounded ends. Each piece marked with thickness and with convenient 3/16" (5mm) hole for hanging.

KENNEDY : เครื่องมือวัดละเอียด KEN-519-1030K, KEN-519-1040K, KEN-519-1050K, KEN-519-1060K, KEN-519-1080K, KEN-519-1100K, KEN-519-1150K, KEN-519-1200K, KEN-519-1250K

Metric feeler stock in 300mm lengths, 12·7mm wide. Rounded ends. Each piece marked with thickness and with convenient 3/16" (5mm) hole for hanging.

SENATOR : เครื่องมือวัดละเอียด SEN-518-3600K, SEN-518-3620K, SEN-518-3640K, SEN-518-3660K

Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8”. Supplied in clear plastic wallets.

KENNEDY : เครื่องมือวัดละเอียด KEN-518-3010K, KEN-518-3210K, KEN-518-3030K, KEN-518-3230K

Round End - Rigid Blade Spring tempered rigid steel blades. 150mm/6” = 19mm blade width. Other lengths = 25mm blade width. With hanging hole.

KENNEDY : เครื่องมือวัดละเอียด KEN-518-3010K, KEN-518-3210K, KEN-518-3030K, KEN-518-3230K

Round End - Rigid Blade Spring tempered rigid steel blades. 150mm/6” = 19mm blade width. Other lengths = 25mm blade width. With hanging hole. Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless. Rigid Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm. Rigid Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.

KENNEDY : เครื่องมือวัดละเอียด KEN-518-0430K, KEN-518-0440K, KEN-518-0460K, KEN-518-0480K, KEN-518-0500K, KEN-518-0520K

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.