G.597

SITESAFE : เครื่องมือช่าง

For cutting veneers, and sheet materials. Curved end allows cutting up to skirts and corners. Set and sharpened teeth. High impact moulded plastic handle. Hardened and tempered spring steel blade.

SITESAFE : เครื่องมือช่าง

Flexible spring blade. Set and sharpened teeth. High impact moulded plastic handle. For cutting apertures and curves in a wide range of materials. Can also be used as a pruning saw.

KENNEDY : เครื่องมือช่าง

For cutting holes in wood, plastics etc. Cutting diameter can be infinitely varied within range. Graduated scale with locking screw. For use in three jaw chucks. 9.6mm hexagon shank. 170mm overall length.

KENNEDY : เครื่องมือช่าง

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

KENNEDY : เครื่องมือช่าง

Manufactured from the finest quality beech wood. Hooks into the edge of the bench allowing the workpiece to be held firmly against one end whilst cutting or marking out.

KENNEDY : เครื่องมือช่าง

Mitre box and block pre-cut at 45 and 90. Bench hook is universal - left and right handed.

KENNEDY : เครื่องมือช่าง

Mitre box and block pre-cut at 45 and 90. Bench hook is universal - left and right handed.

KENNEDY : เครื่องมือช่าง

Traditional carpenter’s pattern.

KENNEDY : เครื่องมือช่าง

Manufactured from rosewood. Craftsman quality with pull slide, brass adjustment screw and brass plated head which is wear resistant and improves accuracy. Fitted with a single and a double spur for marking out mortices. Capacity: 0 - 150 (6”).

KENNEDY : เครื่องมือช่าง

For marking wood and laminate parallel to edge, prior to cutting, sawing or chiselling. With plastic thumbscrew. Capacity: 0 - 150 (6”).

KENNEDY : เครื่องมือช่าง

Classic’ pattern. For professional carpenters.

KENNEDY : เครื่องมือช่าง

Designed to give a life-time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. ‘CAB’ (Cellulose Acetate Butyrate handles).

KENNEDY : เครื่องมือช่าง

Hardened and ground steel scrapers. For fine surface finishing of intricate contour surfaces.Contents: Goose neck, concave/convex and rectangle.

KENNEDY : เครื่องมือช่าง

Suitable for rapidly cutting holes in plasterboard. Hardened and tempered carbon steel blade with polished rosewood handle and brass ferrule. 7tpi.

KENNEDY : เครื่องมือช่าง

Suitable for rapidly cutting holes in plasterboard. Hardened and tempered carbon steel blade with polished rosewood handle and brass ferrule. 7tpi.

KENNEDY : เครื่องมือช่าง

Beechwood handle, V-cut.

KENNEDY : เครื่องมือช่าง

Beechwood handle, for piercing holes in veneer and thin wood.

KENNEDY : เครื่องมือวัดละเอียด

Multi-functional. Can be used as try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the 6” rule and diecast zinc alloy head with the 12” rule. Precision rolled blades.

KENNEDY : เครื่องมือช่าง

Double pinion drill with die cast body and three jaw keyless chuck. Plastic handle with plastic grips and screw top, for bit storage. Used for small drilling operations.

KENNEDY : เครื่องมือช่าง

Heavy duty two speed breat drill with a heavy cast construction and enlosed gearing. Fitted with a three jaw keyless 10mm chuck and supplied with two removable wooden handles. The plate that is pressed against the chest to force the drill point into the work.

KENNEDY : เครื่องมือเวิร์คช็อป

Ideal for use with wood, angle and tubing. Clamping jaws swivel to accept various widths. Die cast aluminium body with bench mounting. Overall base dimensions: 158 x 158mm. Jaw depth: 36mm. Slot width: 10mm.

KENNEDY : เครื่องมือวัดละเอียด

Suitable for all chalk lines. Good colour fastness and weather resistance. Supplied in squeezable bottle.

KENNEDY : เครื่องมือวัดละเอียด

Die Cast Zinc Alloy Case With a red satin finish. Complete with folding locking handle. Felt gasket distributes uniform chalk coating onto line. With sliding hatch for filling. Universal hook attaches to any projection or slot.

KENNEDY : เครื่องมือวัดละเอียด

Aluminium Alloy Case

KENNEDY : เครื่องมือวัดละเอียด

Used for marking regular and irregular angles. The 9” sliding steel blade can be locked into any position using the brass thumbscrew. Rosewood stock with brass tips for greater wear resistance.

KENNEDY : เครื่องมือวัดละเอียด

Can be used independently as a "quick check" tool or to convert a rule or square into a precision angle finder. High strength built-in ceramic magnet with vee groove for use on bars and pipes. Accuracy /-0.5%. For the most accurate readings it is recommended that the angle finder is attached to a steel rule or square by means of the magnet or screws.

KENNEDY : กล่องเครื่องมือ กระเป๋าเครื่องมือ

The Kennedy Saw Horse is designed for supporting wooden planks and boards and is recommended for use in pairs. With spreader bars for extra stability, it features a support bar on the top with metric and inch scale and end stops to secure the workpiece in place. Folds flat for easy transportation and storage.

KENNEDY : เครื่องมือวัดละเอียด

Used for marking out right angles and testing squareness. Rosewood stock with brass face for greater wear resistance. Blades are manufactured from hardened steel, and secured by three steel washers with brass rivets. Solid rosewood stock with solid brass facing securely fixed to the stock provides a hard wearing contact edge.

KENNEDY : เครื่องมือวัดละเอียด

Manufactured from hardened and tempered ground steel. Graduated to 2mm on one side and 1/8” and 1/16” increments on the other. In hands of a skilled carpenter the simple rafter’s square becomes an indispensable calculating device of immense capacity. Enabling the carpenter to easily determine the length of any common, hip, valley or jack rafter for any pitch of roof. To make the proper cuts, top and bottom as well as slide or cheek cuts for any rafter.

KENNEDY : เครื่องมือช่าง

Superior quality skew back. Hardened and ground steel with glazed and polished blade, tensioned and fully sprung. Teeth are set and sharpened. Polished handle with brass screws. Supplied in wallet with tooth guard.

KENNEDY : เครื่องมือช่าง

Hardened and tempered steel blade with carbide teeth.

KENNEDY : เครื่องมือช่าง

Suitable for light duty precise cutting. Narrow blade width allows use in confined areas. Polished rosewood handle with brass ferrule. Blade width: 40mm (11/2”).

KENNEDY : เครื่องมือช่าง

Suitable for precise flush cutting. Sprung alloy steel blade with rigid steel back, polished rosewood handle and brass ferrule. Blade width: 60mm (21/4”).

KENNEDY : เครื่องมือช่าง

Suitable for flush cutting in the most awkward corners on the left or right hand side. Reversible offset alloy steel blade cranked and polished with rigid back. Rosewood handle with brass ferrule. 15tpi.

KENNEDY : เครื่องมือช่าง

Suitable for precise cutting in confined areas or around obstructions. Flexible alloy steel blade, which cuts on the pull stroke. Polished rosewood handle with brass ferrule. 20tpi.

KENNEDY : เครื่องมือช่าง

Alloy steel blade, tensioned with hardened and ground teeth. Heavy rigid brass back and polished rosewood handle. Securely fastened with two brass screws. 20tpi.

KENNEDY : เครื่องมือช่าง

Has file sharpened teeth with plain hardened cutting edges. Impact resistant handle. High quality. 13 points per inch.

KENNEDY : เครื่องมือช่าง

Manufactured from hardened and ground steel with glazed and polished blade, tensioned and fully sprung. Highly polished brass back and handle. Supplied in wallet with tooth guard. 15 points per inch.

KENNEDY : เครื่องมือช่าง

550mm (22") hand saw with a high quality hardened and tempered steel blade with specially hardened teeth. Stays sharp longer. Fitted with a bi-material handle with fingerline for comfort and accuracy. Three ground edges per tooth. Cuts on back stroke. Designed to cut chipboard, blockboard, timber, plywood, hardboard, plasterboard,PVC and laminates.

KENNEDY : เครื่องมือช่าง

With tough enamelled alloy bodies and high carbon heat treated steel blades.